Thursday 20 February 2014

CADWorx and Analysis University Express 2014

Following up on the highly successful CAU Express 2013, Intergraph are once again sending out a team of product specialists for technical presentations of CAESAR, PVELITE and CADWorx software, and to review new features in the 2014 versions.  

This one day event will be held at Focus Rooms, Sunninghill, Gauteng on 30 April 2014.


The CADWorx and Analysis University Express 2014 consists of in depth training sessions on CADWorx, CAESAR II, and PV Elite, all packed into a one-day, high-powered learning experience

Intergraph CADWorx, CAESAR II, and PV Elite product experts will be assisting you in expanding your technical knowledge that will not only leave you well informed, but assist you in becoming a better plant designer and engineer, all while networking and sharing your experience with others. CPD Points will also be obtained for attending the Caesar II and PV Elite training sessions.

Each event will be capped off with product focused Special Interest Groups and an optional networking reception dinner in the form of a social braai. 




Agenda




*Note this Agenda is still is a draft and is subject to change.

 Why Should You Attend ?

What differentiates CAU Express from similar industry events, is that Intergraph is staging the event locally in various countries around the world, and the event provides specific focus on providing technical information to the end user , rather than a focus on product marketing.   It is the user-centered, interactive hands on approach that sets this event apart from others.

  • Enhance and refine technical skills
  • Learn Latest tips and tricks
  • Increase productivity
  • Network with other experienced users
  • Learn about recent product developments
  • Obtain ongoing opportunities to enhance your learning experience
Here is what our past attendees are saying:

"At CAU you learn things from the sessions and other users you meet, that you would never find in the user manuals".

"I was extremely impressed with the standard of presentations the depth of knowledge shown by those who presented, also those who attended. If there is one event that best suits engineers and designers in our industry it must surely be this one."

"Truly enjoyed all the information shared, best of show goes to the interaction with all the Staff and Attendees at this conference.  All had great information to share and look forward to sharing more with all in the future.”

Presenters :

Ray Delaforce – Technical Support Intergraph Corp


Ray joined Intergraph CADWorx and Analysis Solutions group in 2003. Ray provides technical support in the PV Elite support and maintenance department. His duties include training in the use of PV Elite software both in the United States and abroad.

Richard Ay - Chief Technical Officer Intergraph Corp


Richard Ay graduated with a BS in Ocean Engineering in 1977 and moved to Houston to work for a large E&C firm. In 1983 while working for an Offshore Consulting firm, Rich earned an MS in Civil Engineering. In 1985, Rich joined COADE. Since then Rich has spent his time working on the development of CAESAR II, TANK, the Licensing routines, QA and Technical Support procedures. Rich is now the Chief Technical Officer and oversees the development of the Engineering products at ICAS. Rich has his Professional Engineering license and is a member of ASCE and ASME.

Sonia Delgadillo - Senior CADWorx Applications Specialist


Sonia Delgadillo is the Senior CADWorx Applications Specialist for the CADWorx Plant Design Suite, including CADWorx Plant and P&ID Professional, CADWorx Design Review and CADWorx fieldPipe. Sonia joined the Intergraph CADWorx and Analysis Solutions group in January 2009, and is responsible for product presentations, training and dealer and end-user support. She has five years experience teaching designers, engineers, owner operators and EPC firms develop AND implement best practices to improve their effectiveness.

Werner Theron - CAD Applications Manager Chempute Software


Werner Theron is currently the CAD applications manager for Chempute Software, a position he has held since 2008, after he joined Chempute Software, ICAS Global Network Partner, in 2006. He graduated from the Academy of Advanced Design in 1998 as a multi-disciplinary designer before working for a large electronics / telecommunications firm and then later working for consulting engineers and then in the manufacturing industry. He has been using AutoCAD as a design tool since Version 13. His duties include sales, pre-sales demonstrations, technical support and also training and implementation of the CADWorx products. He also won first prize in the 2012 CADWorx & Analysis Solutions Knowledge Base Advisor contest for 30 CADWorx articles.


Details at a Glance

Event Name:  CADWorx & Analysis University Express 2014

Duration: 1-Day

Date: 30th April 2014

Cost: R649 + VAT (per delegate, incl lunch and dinner)

Time: 09:00 AM – 19:30 PM (Registration from 08:00 AM)

Location:  The Core, 1st Floor South, Cnr Kikuyu and Leeuwkop Streets, Sunninghill, Sandton, Johannesburg, Gauteng, South Africa

Host: Chempute Software & Intergraph 



A registration form can be downloaded from the following link :

For more information please contact sales@chempute.com



1 comment: