Chempute Software will be closed for business from 14 December
2012, and will be reopening 7 January 2013.
Friday, 14 December 2012
Thursday, 29 November 2012
Creating CADWorx 2013 Specifications
Thanks to the new CADWorx 2013 Specification
editor, routing with CADWorx 2013 self-aware component types is a breeze,
while maintaining complete accuracy and even including enhanced data, such as
Wall Thicknesses, Bolt Holes and Raised Faces on Flanges.
In a previous post, we covered importing already built
Specifications into the new Specification Editor, from older, legacy versions
of CADWorx. However, is it possible to build entirely new specifications in
CADWorx 2013 and if so how complicated and daunting can this procedure be?
Chempute Software have once again developed a short set
of PDF instructions that guide you through the entire procedure of how to add
component data into the Spec Editor from beginning to end.
Not only has understanding the new Spec Editor been made easy, but also these instructions dive into some of the new options available for creating a more versatile and of course accurate set of Specification Catalogs and Projects.
To download the PDF instructions on how to create
Specifications using the CADWorx 2013 Specification Editor please follow the
link below
Should you have any queries
regarding this please contact nmichel@chempute.com
Tuesday, 6 November 2012
Advance Steel Free Webinars
During the course of November 2012, Graitec will hosting a number of dedicated Advance Steel Webinars. These will take place on Thursday, 8th November 2012, Thursday 15th November 2012 and Thursday the 22nd November 2012.
These Webinars will cover a range of topics including a General Overview, Advanced Tools for Miscellaneous Steel and Drawing Customization.
If you are interested in attending these Webinars, please follow the links below.
General Overview: Discover the Software in 30 Minutes.
Thursday, 8th November 2012
From 9:00 am to 9:30 am CEST - Metric
From 6:00 pm to 6:30 pm CEST - Imperial
Advanced Tools for Miscellaneous Steel
Thursday, 15th November 2012
From 9:00 am to 9:30 am CEST
From 6:00 pm to 6:30 pm CEST
Drawing Customization
Thursday, 22nd November 2012
From 9:00 am to 9:30 am CEST
From 6:00 pm to 6:30 pm CEST
Thursday, 29th November 2012
From 9:00 am to 9:30 am CEST
From 6:00 pm to 6:30 pm CEST
From 6:00 pm to 6:30 pm CEST
Thursday, 1 November 2012
CADWorx 2013 R1 SP3
Intergraph
CADWorx & Analysis Solutions has just released Service Pack 3 (SP3) for
CADWorx 2013 R1. SP3 has been released to address a critical bug that
may, in isolated cases, cause model corruption.
If you are running
CADWorx 2013, we encourage you to install CADWorx 2013 R1 SP3 as soon as
possible.
Monday, 1 October 2012
Advance Steel Free October Webinars
During the course of October 2012, Graitec will hosting a number of dedicated Advance Steel Webinars on Thursday, 4th October 2012, Thursday 11th October 2012 and Thursday the 25th October 2012. These will cover a range of topics including a General Overview, StruCAD switch over to Advance Steel and Advanced Tools for Miscellaneous Steel.
Thursday, 4th October 2012
Thursday, 11th October 2012
Thursday, 25th October 2012
Advanced Tools for Miscellaneous Steel
Thursday, 18th October 2012
If you are interested in attending these Webinars, please follow the links below.
General Overview: Discover the Software in 30 Minutes.
Thursday, 4th October 2012
From 9:00 am to 9:30 am CEST - Metric
From 6:00 pm to 6:30 pm CEST - Imperial
StruCAD Switch Over to Advance Steel
Thursday, 11th October 2012
From 9:00 am to 9:30 am CEST
From 6:00 pm to 6:30 pm CEST
Thursday, 25th October 2012
From 9:00 am to 9:30 am CEST
From 6:00 pm to 6:30 pm CEST
Advanced Tools for Miscellaneous Steel
Thursday, 18th October 2012
From 9:00 am to 9:30 am CEST
From 6:00 pm to 6:30 pm CEST
From 6:00 pm to 6:30 pm CEST
Friday, 24 August 2012
CADWorx Discovery Tour October 2012
Intergraph CADWorx and Analysis are sending out two of their senior sales people to South Africa in October 2012, to present the new features of CADWorx 2013 and also showcase the future for CADWorx Development.
Chempute will be hosting free half day seminars in Durban and Johannesburg. Intergraph will also be available for meeting with individual companies to answer questions about CADWorx and other Intergraph software products. Relevant dates and times can be seen below.
Intergraph CADWorx & Analysis Discovery Tour Durban
Venue: Makaranga Garden Lodge, 1A Igwababa Road, Kloof
Date: 8th October 2012
Time: 09:00 AM - 14:00 PM (Registration from 08:00 AM)
Durban IDT Registration Form.
Date: 8th October 2012
Time: 09:00 AM - 14:00 PM (Registration from 08:00 AM)
Durban IDT Registration Form.
Intergraph CADWorx & Analysis Discovery Tour Johannesburg
Venue: 8 Kikuyu Road, Sunninghill, Gauteng
Date: 10th October 2012
Time: 09:00 AM - 15:30 PM (Registration from 08:00 AM)
Johannesburg IDT Registration Form.
Date: 10th October 2012
Time: 09:00 AM - 15:30 PM (Registration from 08:00 AM)
Johannesburg IDT Registration Form.
To register please complete the above registration forms and return to sales@chempute.com or fax to 031 764 5934.
Friday, 3 August 2012
CAESAR II Reinstatement Program
Up to 70% discount on reinstatement fees for licenses that have expired maintenance. The user will be provided with the latest version of CAESAR II as well as one year of future MUS (Maintenance, Updates and Support). Offer valid until 30 Sept 2012.
Subscribe to:
Posts (Atom)