Following
up on the highly successful CAU Express 2013, Intergraph are once again sending
out a team of product specialists for technical presentations of CAESAR,
PVELITE and CADWorx software, and to review new features in the 2014
versions.
This one day event will be held at Focus Rooms, Sunninghill, Gauteng on 30 April 2014.
The
CADWorx and Analysis University Express 2014 consists of in depth training
sessions on CADWorx, CAESAR II, and PV Elite, all packed into a one-day,
high-powered learning experience
Intergraph
CADWorx, CAESAR II, and PV Elite product experts will be assisting you in
expanding your technical knowledge that will not only leave you well informed,
but assist you in becoming a better plant designer and engineer, all while
networking and sharing your experience with others.
Each
event will be capped off with product focused Special Interest Groups and an
optional networking reception dinner in the form of a social braai.
Agenda
*Note this Agenda is still is a draft and is subject to change.
Why
Should You Attend ?
What
differentiates CAU Express from similar industry events, is that Intergraph is
staging the event locally in various countries around the world, and the event
provides specific focus on providing technical information to the end user ,
rather than a focus on product marketing. It is the user-centered,
interactive hands on approach that sets this event apart from others.
- Enhance and refine technical
skills
- Learn Latest tips and tricks
- Increase productivity
- Network with other experienced
users
- Learn about recent product
developments
- Obtain ongoing opportunities to
enhance your learning experience
Here
is what our past attendees are saying:
"At
CAU you learn things from the sessions and other users you meet, that you would
never find in the user manuals".
"I was extremely impressed with the standard of presentations the depth of knowledge shown by those who presented, also those who attended. If there is one event that best suits engineers and designers in our industry it must surely be this one."
"I was extremely impressed with the standard of presentations the depth of knowledge shown by those who presented, also those who attended. If there is one event that best suits engineers and designers in our industry it must surely be this one."
"Truly
enjoyed all the information shared, best of show goes to the interaction with
all the Staff and Attendees at this conference. All had great information
to share and look forward to sharing more with all in the future.”
Presenters
:
Ray
Delaforce – Technical Support Intergraph Corp
Ray
joined Intergraph CADWorx and Analysis Solutions group in 2003. Ray provides
technical support in the PV Elite support and maintenance department. His
duties include training in the use of PV Elite software both in the United
States and abroad.
Richard Ay - Chief Technical Officer Intergraph Corp
Richard Ay graduated with a BS in Ocean Engineering in 1977 and moved to Houston to work for a large E&C firm. In 1983 while working for an Offshore Consulting firm, Rich earned an MS in Civil Engineering. In 1985, Rich joined COADE. Since then Rich has spent his time working on the development of CAESAR II, TANK, the Licensing routines, QA and Technical Support procedures. Rich is now the Chief Technical Officer and oversees the development of the Engineering products at ICAS. Rich has his Professional Engineering license and is a member of ASCE and ASME.
Sonia
Delgadillo - Senior CADWorx Applications Specialist
Sonia
Delgadillo is the Senior CADWorx Applications Specialist for the CADWorx Plant
Design Suite, including CADWorx Plant and P&ID Professional, CADWorx Design
Review and CADWorx fieldPipe. Sonia joined the Intergraph CADWorx and Analysis
Solutions group in January 2009, and is responsible for product presentations,
training and dealer and end-user support. She has five years experience
teaching designers, engineers, owner operators and EPC firms develop AND
implement best practices to improve their effectiveness.
Werner Theron - CAD Applications Manager Chempute Software
Werner Theron is currently the CAD applications manager for Chempute Software, a position he has held since 2008, after he joined Chempute Software, ICAS Global Network Partner, in 2006. He graduated from the Academy of Advanced Design in 1998 as a multi-disciplinary designer before working for a large electronics / telecommunications firm and then later working for consulting engineers and then in the manufacturing industry. He has been using AutoCAD as a design tool since Version 13. His duties include sales, pre-sales demonstrations, technical support and also training and implementation of the CADWorx products. He also won first prize in the 2012 CADWorx & Analysis Solutions Knowledge Base Advisor contest for 30 CADWorx articles.
Details
at a Glance
Event
Name:
CADWorx & Analysis University Express 2014
Duration: 1-Day
Date: 30th April 2014
Cost: R649 + VAT (per
delegate, incl lunch and dinner)
Time: 09:00 AM – 19:30
PM (Registration from 08:00 AM)
Location: The Core,
1st Floor South, Cnr Kikuyu and Leeuwkop Streets, Sunninghill, Sandton,
Johannesburg, Gauteng, South Africa
Host: Chempute Software
& Intergraph
A
registration form can be downloaded from the following link :
For
more information please contact sales@chempute.com
